ngoam:TraceRtNve
TraceRoute Nve
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | action:AdminSt (scalar:Enum8) |
The administrative state of the object or policy. | SELECTION: 0 - unknown 1 - start 2 - stop 3 - suspend DEFAULT: unknown |
| descr | action:Descr (naming:Descr) |
Description | RANGE: [0 , 128] |
| dot1q | ngoam:Dot1q (scalar:Uint16) |
dot1q | RANGE: [0 , 4096] |
| dstIp | address:IPv4 |
Destination Node ID | Value must match ipv4 format |
| dstIpv6 | address:IPv6 |
Destination Node ID | Value must match ipv6 format |
| dstMAC | address:MAC |
Destination Node ID | Value must match MM:MM:MM:SS:SS:SS format |
| dstPort | ngoam:DestPort (scalar:Uint16) |
Destination Port | RANGE: [0 , 0xffff] DEFAULT: 0 |
| dstSid | address:IPv6 |
Destination Segment Identifier(SID) for SRv6 | Value must match ipv6 format |
| egressIf | nw:IfId (base:IfIndex) |
Interface ID | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| endOp | address:IPv6 |
Override End.OP value for SRv6 | Value must match ipv6 format |
| endOtp | address:IPv6 |
Override End.OTP value for SRv6 | Value must match ipv6 format |
| freq | action:Freq (scalar:Time) |
Frequency at which tasks are executed | SELECTION: 0 - one-shot |
| macsrcif | nw:IfId (base:IfIndex) |
payload source interface | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| maxTtl | ngoam:TTL (scalar:UByte) |
Time to live value | RANGE: [1 , 255] DEFAULT: 5 |
| noReducedSRH | scalar:Bool |
Preserve the entire SID list in the SRH | SELECTION: true or false |
| payload_dot1q | ngoam:Dot1q (scalar:Uint16) |
dot1q | RANGE: [0 , 4096] |
| payload_dstip | address:IPv4 |
dst IP v4 address | Value must match ipv4 format |
| payload_dstipv6 | address:IPv6 |
dst IP v6 address | Value must match ipv6 format |
| payload_dstmac | address:MAC |
dst mac address | Value must match MM:MM:MM:SS:SS:SS format |
| payload_dstport | scalar:Uint16 |
payload dst port | RANGE: [0, 65535] |
| payload_protocol | ngoam:Protocol (scalar:Uint16) |
payload protocol | RANGE: [0 , 255] |
| payload_srcif | nw:IfId (base:IfIndex) |
payload source interface | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| payload_srcip | address:IPv4 |
src IP v4 address | Value must match ipv4 format |
| payload_srcipv6 | address:IPv6 |
src IP v6 address | Value must match ipv6 format |
| payload_srcmac | address:MAC |
src mac address | Value must match MM:MM:MM:SS:SS:SS format |
| payload_srcport | scalar:Uint16 |
payload src port | RANGE: [0, 65535] |
| profileId | ngoam:ProfId (scalar:Uint16) |
Ngoam profile ID | RANGE: [1 , 1023] |
| session | string:Basic |
session | A sequence of characters |
| sessionId | scalar:Uint32 |
session ID | RANGE: [0, 4294967295] |
| sidList | string:Basic |
SID list : String of v6 Segment Identifiesr(SID) seperated by space | A sequence of characters |
| srcIp | address:IPv4 |
Source IP | Value must match ipv4 format |
| srcIpv6 | address:IPv6 |
Source IP | Value must match ipv6 format |
| srcPort | ngoam:SrcPort (scalar:Uint16) |
Source Port | RANGE: [0 , 0xffff] DEFAULT: 0 |
| timeout | ngoam:Timeout (scalar:UByte) |
Timeout | RANGE: [0 , 25] DEFAULT: 2 |
| type | action:Type (scalar:Enum8) |
The specific type of the object or component. | SELECTION: 1 - clear 2 - reset 3 - reload 4 - locate 5 - install 6 - test 7 - collect 8 - interface-in-service DEFAULT: clear |
| verifyHost | scalar:Bool |
Verify Host | SELECTION: true or false |
| vni | ngoam:Vnid (scalar:Uint32) |
VNI | RANGE: [1 , 16777215] |
| vrf | ngoam:Vrf (l3:VrfName) |
VRF |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| peerClassId | mo:MoClassId |
The BGP neighbor. | |
| rSz | action:RetentionSize (scalar:Uint16) |
The retention size of the task results. | RANGE: [1 , 1024] DEFAULT: 100 |
| rTm | action:RetentionTime (scalar:Time) |
The retention time of the task results. | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| startTs | mo:TStamp (scalar:Date) |
The date and time when the task began. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |